FIREMAN PHONE
MC-VEAM-001H
The MC-VEAM-001H fireman phone is designed for professional voice evacuation systems where emergency personnel require secure local control, priority live calling and clear system status information. The wall-mounted cabinet includes a first-help handheld microphone, status indicators, pre-recorded message control and live announcement capability.
During an emergency, authorised operators can acknowledge or reset fault conditions, trigger priority messages and make priority live calls to assigned zones. The unit communicates with the voice evacuation controller using standard shielded CAT6 cabling and RJ45 connectors in a redundant loop topology for dependable emergency operation.
Key Features
- Fireman operation priority Emergency calls from the fireman phone are handled with priority over normal paging functions.
- Status and fault indicators Dedicated indicators show emergency status, AC/DC supply, microphone condition and system faults.
- Live emergency announcement Handheld microphone enables direct live emergency communication.
- Fully monitored unit The fireman phone is monitored by the system for reliable operation and fault reporting.
- Indoor/outdoor suitability IP55 protected red cabinet with stainless steel and ABS construction for demanding locations.
- Certified voice evacuation use Designed for EN54-16 public address and voice alarm systems.
- Pre-recorded message control Allows emergency or alert messages to be broadcast to assigned or all zones.
- Programmable buttons Four programmable buttons provide dedicated fireman operation commands.
- Redundant network loop CAT6 and RJ45 loop connection supports communication distances up to 600 metres.
- System scalability Supports up to 32 fireman phone units within the voice evacuation system.
| General Information | |
| Model | MC-VEAM-001H |
| Description | Fireman's Microphone |
| System Capacity & Power | |
| Power Consumption | 3W |
| System Capacity | 32 units |
| Audio Specifications | |
| Frequency Response | 80Hz - 16kHz |
| THD | <1% at RMS, 1kHz |
| Signal-to-Noise Ratio | >70dB |
| SPL | 30mV |
| Electrical & Environment | |
| Power Supply | Phantom power 20V - 27.5V, ±20% |
| IP Rating | IP55 |
| Operating Temperature / Humidity | -20°C to +50°C; <95% no condensation |
| Physical Specifications | |
| Finish | Stainless steel in red and ABS cover |
| Dimensions & Weight | 298(W) x 298(D) x 89(H) mm; 3.8kg |
| File Name | ||
|---|---|---|
|
MC-VEAM-001H_brochure
|
||
|
MC-VEAM-001H_Datasheet
|
||